Home

/

Fire suppression explained

The complete guide

Fire suppression explained: water mist, sprinklers and what your building needs

A fire suppression system senses the heat of a fire and releases water automatically to control it, protecting the escape route and buying time to get out. In UK homes and buildings that means water mist or fire sprinklers. This guide covers when you need one, how each works, the rules in England, Scotland and Wales, what it costs and how to get Building Control sign-off.

✓ Updated November 2026

✓ Written by our technical team

✓ England, Scotland and Wales

✓ Water mist and sprinklers

✓ BS EN 14972-17 tested

The basics

What is a fire suppression system?

A fire suppression system is a fixed system of pipework and heat-activated nozzles or heads that releases water automatically when a fire starts. It controls the fire in the room where it starts, helps keep the escape route survivable, and gives people time to get out and the fire service time to arrive.

Fine droplets at high pressure

Water mist

A high-pressure pump forces water through specially designed nozzles to make a very fine mist, with droplets often 50 to 100 microns across. The mist cools the fire and the air, displaces oxygen at the flame and blocks radiant heat, using far less water than a sprinkler.

Larger droplets at lower pressure

Fire sprinklers

Each sprinkler head opens on its own when it reaches fire-level heat, usually around 68°C, and sprays water over the area below. Sprinklers need a higher flow of water, so they often need a storage tank or booster pump.

A common myth

They do not go off with smoke

Both types are triggered by heat, not smoke. Burnt toast, steam or a smoke alarm should not set them off, and only the nozzles or heads near the fire operate.

The rules

Do I need a fire suppression system?

Not every building needs one. Suppression is usually required because of the type of building, its height, where it is in the UK, the work you are doing, or how a new layout affects the way people escape.

Common situations where fire suppression is required or requested in the UK
SituationWhat usually appliesWhere
Open-plan ground floor, or an opened-up hallway or stairBuilding Control may ask for suppression when the protected escape route is lost. A designed system can let you keep the layout.UK-wide
Loft conversion adding a storeyThe new storey usually needs a protected escape route. Where the stair cannot be fully protected, suppression can form part of an agreed alternative.UK-wide
New homes and flats created by conversionAutomatic fire suppression is required in new houses and flats, including those created by conversion, under the Domestic Fire Safety (Wales) Measure 2011.Wales
New blocks of flats with a storey 11m or more above groundApproved Document B requires sprinklers throughout. Water mist can be proposed as an equivalent where Building Control accepts it.England
New-build flats and shared residential buildingsScottish building standards require automatic fire suppression in all new-build flats, regardless of height, and in other residential buildings including social housing.Scotland
New care homesSince 2 March 2025, Approved Document B requires sprinklers in all new care homes, regardless of height.England
Higher-risk buildings (18m or 7 storeys and above)Building Safety Regulator approval is needed before work starts, and accurate fire safety records must be kept for the golden thread.England
Offices and commercial buildingsApproved Document B expects sprinklers throughout buildings with a storey more than 30m above ground. Below that they are often used to allow larger open floors, or asked for by insurers.England
HMOs and the common parts of flatsThe responsible person must keep any fire safety equipment, including suppression, maintained in efficient working order.UK-wide

This is a summary, not a substitute for your fire strategy. Requirements depend on the building, so always confirm with your Building Control body. We can speak to them for you.

Sign-off

If Building Control has asked for fire suppression

It does not usually mean changing your plans or rebuilding walls. A properly designed water mist system can often be the solution that lets you keep the open-plan layout you wanted. You do not need to manage the technical discussion yourself.

01

Send your plans

Send your floor plans and any comments from Building Control. No plans yet? Tell us about the property.

02

Get a guide price

Our residential team runs the initial calculations and gives you a guide price for the system.

03

Free design for approval

If the price works, we design the system free of charge and can speak to your Building Control officer, architect or builder for you.

04

Installation

Installation can often be arranged within 7 to 10 working days once the project is ready, by our SafeContractor-accredited team.

05

Commissioning and certificates

We commission the system and hand over the certification and documents Building Control needs to sign off.

06

Annual servicing

Your system is put on an annual service schedule, and tests itself around every 28 days in between.

More on working with Building Control →

Compare

Water mist vs sprinklers

Both can protect a home or building and both can be accepted by Building Control. The right choice depends on the water supply, the building and how much disruption the installation can cause. We design and install both, so we have no reason to push one over the other.

Water mist compared with fire sprinklers
Water mistFire sprinklers
How it puts out fireVery fine droplets cool, displace oxygen at the flame and block radiant heatLarger droplets wet and cool the fire and the area around it
Water useFar less. The International Water Mist Association puts it at up to 85% less than traditional sprinklers (International Fire & Safety Journal, 2023)Higher flow and volume
Water supplyOften runs from the mains with a compact high-pressure pumpOften needs a storage tank or booster pump
PipeworkSmall-bore, easier to route in existing homesLarger pipes
Damage after activationLess water to clean up and a quicker return to normalMore water damage to the room and below
Retrofit in a lived-in homeWell suited, with less disruptionPossible, but more intrusive
Fire test and design standardsBS EN 14972-17:2025 (residential fire test) and BS EN 14972-1 (design, installation and maintenance)BS 9251:2021 (residential) and BS EN 12845 (commercial)
Where guidance names itAccepted as an alternative where equivalent performance is demonstratedNamed directly in Approved Document B
ServicingAnnual, plus a self-test around every 28 days on SmartMist systemsAnnual
Read the full water mist vs sprinklers guide →

Step by step

How a water mist system works in a fire

01

Heat builds

A fire starts and the temperature at the ceiling rises quickly.

02

The nearest nozzle opens

Only the nozzle heated by the fire operates, and the pump starts delivering water at high pressure.

03

Mist takes the heat out

Billions of tiny droplets absorb heat, turn to steam, displace oxygen at the flame and block radiant heat.

04

Escape stays open

The fire is controlled in the room it started in, keeping the escape route survivable, with far less water damage to clean up.

How water mist works, in depth →

Budgeting

How much does a water mist system cost?

The price depends on the area to be protected, the number of nozzles, the water supply and the stage your project has reached. These are typical SmartMist prices.

Small retrofit

From around £3,900

A two-nozzle system in an existing home.

Typical home

Around £5,800

A typical SmartMist residential installation.

Larger projects

£15,000 or more

Larger homes, apartment buildings and developments, priced individually.

What a quote should include

Our quotations cover the complete installation: system design, access work, pipework and nozzles, making good our openings, commissioning, certification and handover documents. When you compare quotes, check they are like for like. Some providers expect the homeowner or builder to cut access holes, prepare pipe routes and arrange repairs afterwards.

After installation

Every system needs a professional service once a year. SmartMist systems also test themselves around every 28 days and raise an audible and visual alarm if anything needs attention.

Specifiers

Standards and regulations explained

The documents that set how suppression systems are tested, designed, installed and maintained in the UK, and where each one stands today.

UK fire suppression standards and regulations and their current status
Standard or regulationWhat it coversStatus
BS EN 14972-17:2025Fire test protocol for water mist systems in residential occupancies. Our SmartMist DOME™ system has met the performance criteria of its open room fire test (3.5 m room height) at the FPA.Current
BS EN 14972-1Design, installation, inspection and maintenance of water mist systems. Our installations are designed to it.Current
BS 8458:2015The previous UK residential water mist standard.Withdrawn July 2025
BS 9251:2021Fire sprinkler systems for domestic and residential occupancies.Current
BS EN 12845Automatic sprinkler systems for commercial and industrial buildings.Current
Approved Document BStatutory fire safety guidance for the Building Regulations in England, including when sprinklers are required.Current
Regulatory Reform (Fire Safety) Order 2005Fire safety duties in non-domestic premises and the common parts of flats in England and Wales, including maintaining fire safety equipment.Current
Fire (Scotland) Act 2005 and Fire Safety (Scotland) Regulations 2006The equivalent fire safety duties in Scotland.Current
See our test evidence and accreditations →

Glossary

Key terms in plain English

Protected escape route

A hallway or stair enclosed by fire-resisting walls and doors so people can get out safely. Opening it up is a common reason Building Control asks for suppression.

Compensatory feature

A safety measure, such as water mist, accepted in place of something the design cannot provide, like a fully enclosed stair.

Responsible person

The person or organisation in control of non-domestic premises, or the common parts of flats, who must manage fire safety and keep equipment maintained.

Golden thread

The accurate, up-to-date record of a higher-risk building's fire and structural safety information, kept throughout its life.

Commissioning

Testing a newly installed system to prove it works as designed, then issuing the certificate used for sign-off.

Retrofit

Fitting a system into a building that is already built and often lived in. Small-bore mist pipework makes this much easier.

FAQs

Fire suppression questions

Is water mist as effective as fire sprinklers?

Both can control a fire and both can be accepted by Building Control. Water mist is accepted as an alternative to sprinklers where equivalent performance is demonstrated. Our SmartMist DOME™ residential water mist system has met the performance criteria of the BS EN 14972-17:2025 open room fire test (3.5 m room height) at the FPA's UKAS-accredited fire test laboratory.

Will a fire suppression system go off by accident?

It is very unlikely. Water mist nozzles and sprinkler heads are triggered by the heat of a fire, not by smoke, steam or burnt toast, and only the ones near the fire operate. Accidental discharge is rare and is usually caused by physical damage to a nozzle, which is one reason the system is checked at every annual service.

Can water mist be fitted in an existing home?

Yes. Small-bore pipework and a compact pump make water mist well suited to retrofit, and it can usually be installed while you live in the property.

Does a water mist system need a water tank?

Often not. Water mist uses far less water than sprinklers and can often run directly from the mains through a compact pump. We survey your supply to confirm what is needed.

Who deals with Building Control?

We can. Send us your plans and any Building Control comments, and we will design the system free of charge for your submission and speak to your Building Control officer, architect or builder on your behalf.

How quickly can a system be designed and installed?

We agree design and installation dates with you once the project is ready, and installation can often be arranged within 7 to 10 working days.

How much does a water mist system cost?

A small two-nozzle retrofit starts from around £3,900, a typical SmartMist residential installation is around £5,800, and larger homes, apartment buildings and developments are priced individually and can cost £15,000 or more.

Is fire suppression mandatory in Wales and Scotland?

In Wales, automatic fire suppression is required in new homes and in flats created by conversion. In Scotland, it is required in all new-build flats and in other residential buildings, including social housing. Always confirm the requirement for your project with Building Control.

Does a fire suppression system need servicing?

Yes. Every system needs a professional service once a year. SmartMist systems also run an automatic self-test around every 28 days and alert you if anything needs attention.

Last reviewed: November 2026 by the SmartMist technical team. We update this guide when standards or regulations change.

Next step

Get the right system designed for your building

Send us your drawings or any comments from Building Control. We will recommend water mist, sprinklers or a combination, and provide the design and test evidence you need for sign-off.