
Residential Fire Suppression


Water mist and sprinkler systems for offices, from small teams to large multi-tenant buildings. Designed to control a fire quickly, limit water damage to IT and fit-out, and install around your working day.

Water mist or sprinklers: independent advice, design and installation
As a commercial fire suppression specialist, we design and install both water mist and sprinkler systems, so we can recommend what actually suits your building, budget and fire strategy.
LPCB-certified water mist nozzles and in-house compliance expertise
Our commercial water mist systems use LPCB-certified nozzles. Our in-house compliance team prepares statements of equivalence and works directly with fire engineers, approved inspectors and fire authorities.
Full BIM coordination in Revit and AutoCAD
We coordinate fire suppression design with M&E and other services using BIM, cutting clashes on site and helping consultants and main contractors keep projects on programme.
UK water mist manufacturer with nationwide installation
We’re a SafeContractor-approved, British manufacturer of water mist fire suppression systems, supplying, installing and maintaining commercial systems across the UK through our accredited network.
In office environments, fire risk is often underestimated. While hazards may be less visible than in industrial settings, the impact of a fire can be just as severe: staff evacuation, lost working time and damage to essential systems.
SmartMist provides fire suppression for offices that focuses on fast response and minimal impact. Our systems are designed to control fire quickly while helping businesses maintain continuity and protect the people inside the building. Every office operates differently, so we design around how yours is used, whether that's dense open-plan floors, server cupboards or customer-facing space.

Two sites with the same floor area can need very different systems. These are the factors we look at first.
Under Approved Document B, any building with a storey more than 30m above ground should be sprinklered throughout. Taller office blocks are the clearest case for a system.
Large open floors let smoke and heat travel quickly. Suppression controls the fire early, before it spreads across a floor.
Electrical equipment is a common ignition source, and water damage to it is costly. Water mist uses far less water than sprinklers.
Most offices can't close for an install. Systems need to go in around working hours, often floor by floor.
Suspended ceilings, raised floors and changing layouts affect where heads and pipework can go, and how easily the system adapts later.
Converting offices to flats, or the reverse, can bring new requirements, such as BS 9251 residential sprinklers in some conversions.
Only some. Approved Document B expects sprinklers in buildings with a storey over 30m, and fire strategies or insurers may call for them in larger or higher-risk offices.
Requires sprinklers throughout buildings with a top storey more than 30m above ground. Below that, sprinklers can be used to justify larger compartments or other design freedoms.
The Regulatory Reform (Fire Safety) Order 2005 requires a suitable fire risk assessment. Suppression is one way to reduce the risks it identifies.
Insurers may ask for automatic suppression, particularly where IT, records or high-value fit-out are at stake, or where downtime would be costly.
We install both, so we recommend whichever meets your design standard with the least water and plant space.
High-pressure water mist uses up to 90% less water than traditional sprinklers, which limits damage to IT, furniture and floors below. Small-bore pipework is easier to route through ceilings in occupied buildings, and mist systems are fire tested for offices under BS EN 14972-3.
Explore commercial water mist →Sprinklers to BS EN 12845 or LPC Rules are the established route for offices, and the one some insurers and fire strategies specify, particularly in tall buildings. Where sprinklers are required, we design and install them, including extensions to existing systems during fit-outs.
Explore commercial sprinklers →Office systems work best when they're planned with the fit-out, not after it. We agree head layouts with your architect or M&E team, check water supply and tank space, and coordinate with ceilings, lighting and the fire alarm.
For occupied offices we phase the work floor by floor, or out of hours, so your team can keep working.
Heads and pipe routes coordinated with ceilings, lighting and services.
Mist protection for server cupboards and comms rooms with minimal water.
Flow tests and tank sizing, with basement or plant-room tanks where needed.
Floor-by-floor or out-of-hours work around your team.
Which standard applies depends on the system, the building and, often, your insurer.
Building Regulations fire safety guidance for England, including the 30m sprinkler threshold.
Automatic sprinkler design, installation and maintenance.
Design, installation and maintenance framework for water mist systems.
Water mist fire test protocol for offices, school classrooms and hotels.
Fire safety in the design, management and use of buildings.
This page explains typical requirements. It isn't a fire strategy or design specification.
UK designed and built
Water mist and sprinkler systems

Office Flats, Cricklewood
SmartMist was engaged to install a mist suppression system in a converted warehouse that had been vacant for over eight years. The end client is a prominent serviced office provider, and our partnership with the M&E contractor, known for its reliability and quality, ensured a seamless collaboration.
The project took place over the summer of 2024 and lasted ve weeks, with an average of four staff members on site.
Send drawings and the fire strategy. We'll confirm the likely system and design standard.
Layouts, hydraulic calculations and documents for your insurer and Building Control.
Planned around your build programme or operating hours.
Testing, handover pack and a maintenance plan from day one.
Commercial systems need an annual service, plus the routine owner checks the design standard sets. We test pumps and valves, check heads and nozzles for damage and obstruction, and provide the service records insurers expect. We also maintain systems installed by other contractors.
Service & maintenance plans →Most projects are quoted after a drawing review.
Read our cost guide →Not always. Approved Document B expects sprinklers throughout buildings with a storey more than 30m above ground. Below that height, sprinklers are usually optional, but fire strategies use them to allow larger open floors, and insurers may ask for them where downtime or IT losses would be costly.
Yes. We plan installations around your working hours, often floor by floor or out of hours, so your team can keep working.
Any water-based system uses some water, but high-pressure water mist uses far less than traditional sprinklers and only the heads near the fire activate. That limits damage to IT, furniture and the floors below.
It depends on the building. Mist suits offices where water damage, tank space or ceiling space is a concern. Sprinklers may be required where an insurer or fire strategy specifies BS EN 12845 or LPC Rules. We'll recommend one after a survey.
Yes. We offer a full service including design, installation, commissioning, scheduled maintenance, compliance checks, and emergency support.
Yes. We can inspect, upgrade, and maintain existing mist or sprinkler systems to bring them in line with current regulations and performance expectations.
Our commercial water mist systems are designed to BS EN 14972-1, and our commercial sprinkler systems to BS EN 12845.
For residential projects, our sprinklers are designed to BS 9251. Our SmartMist DOME™ residential water mist system has met the performance criteria of the BS EN 14972-17:2025 open room fire test (3.5 m room height) at the FPA, a UKAS-accredited fire test laboratory, and every installation is designed to BS EN 14972-1. We also work to project and insurer requirements.
We assess your fire strategy, occupancy type, building design, and water supply. Based on this, we may recommend high-pressure mist, low-pressure mist, wet or dry sprinkler systems, or a hybrid approach.
We recommend annual servicing in line with BS 9251, BS EN 14972-1 or BS EN 12845, depending on the system type. In high-risk or heavily used environments, more frequent checks may be required.
Yes. SmartMist offers both advanced water mist systems and traditional commercial sprinkler systems. We recommend the most suitable option based on your building’s fire strategy, layout, risk profile, and water supply.
Yes, fire sprinkler systems can be retrofitted into most commercial buildings. However, factors such as ceiling space, water supply, and pipe routing must be considered. Retrofitting is often recommended for older buildings, hotels, offices, and apartment blocks to enhance fire safety without major structural changes.
Send what you have. These help us quote faster:
Or call 0330 113 5900