
Residential Fire Suppression


Water mist suppression for server rooms, comms rooms and data centres. Protects equipment and uptime without the room sealing and refills gas systems need.

Water mist or sprinklers: independent advice, design and installation
As a commercial fire suppression specialist, we design and install both water mist and sprinkler systems, so we can recommend what actually suits your building, budget and fire strategy.
LPCB-certified water mist nozzles and in-house compliance expertise
Our commercial water mist systems use LPCB-certified nozzles. Our in-house compliance team prepares statements of equivalence and works directly with fire engineers, approved inspectors and fire authorities.
Full BIM coordination in Revit and AutoCAD
We coordinate fire suppression design with M&E and other services using BIM, cutting clashes on site and helping consultants and main contractors keep projects on programme.
UK water mist manufacturer with nationwide installation
We’re a SafeContractor-approved, British manufacturer of water mist fire suppression systems, supplying, installing and maintaining commercial systems across the UK through our accredited network.
An uncontrolled fire in a data centre or server room can be catastrophic, taking services offline and destroying equipment and data. Electrical faults, battery systems and cabling are common causes, and the cost of downtime often outweighs the damage itself.
SmartMist provides high-pressure water mist suppression for data centres and server rooms, designed, installed and project-managed in-house. Each project is researched individually to protect both the equipment and the building, and our systems can work alongside existing suppression already in place.

Two sites with the same floor area can need very different systems. These are the factors we look at first.
Power distribution, UPS and lithium-ion batteries are common ignition sources and can reignite after a fire is knocked down.
For most operators the cost of an outage is greater than the cost of the damage, so a fire has to be controlled fast.
Traditional sprinklers can damage equipment beyond the fire. Mist uses a fraction of the water and cools without drenching.
Gas systems rely on a sealed room to hold their concentration. Mist doesn't, which helps in rooms with cable penetrations and airflow.
High airflow from cooling systems affects detection and suppression, and has to be considered in the design.
Insurers and colocation clients often specify approved systems, such as FM Approvals.
Yes. High-pressure water mist uses so little water it can protect live equipment, and water mist systems can be approved for data processing equipment rooms under FM 5560.
FM Approvals' standard for water mist systems, with test protocols for data processing equipment rooms and halls. Many insurers ask for FM Approved systems.
The European data centre standard covers fire protection as part of the facility's design, alongside power and cooling.
Insurers and colocation clients often specify approved suppression and documented maintenance as a condition of cover or contract.
We install both, so we recommend whichever meets your design standard with the least water and plant space.
High-pressure water mist cools the fire and the surrounding equipment with very little water, reducing the risk of reignition from batteries. Unlike gas systems, it doesn't need a sealed room or costly agent refills after discharge.
Explore commercial water mist →Pre-action sprinklers are common in data centres, especially where an insurer specifies them. The pipes stay dry until detection confirms a fire, so a damaged pipe can't flood the room. We design and install pre-action systems where they're the right fit.
Explore commercial sprinklers →Data centre systems are designed around the room: its layout, airflow, cable routes and the equipment it holds. We coordinate with your M&E, cooling and detection teams, and plan installation so live services aren't interrupted.
Mist systems can be added alongside existing gas or sprinkler protection, for example to cover battery rooms or new halls.
Ceiling and underfloor protection for server rows.
Protection for battery rooms and power systems.
Early warning linked to mist activation.
Work planned so services stay online.
Which standard applies depends on the system, the building and, often, your insurer.
FM Approvals standard for water mist, including data processing rooms.
Design, installation and maintenance framework for water mist systems.
European standard for data centre facilities and infrastructures.
Gaseous suppression design, for comparison or existing gas systems.
Automatic sprinkler design, including pre-action systems.
This page explains typical requirements. It isn't a fire strategy or design specification.
UK designed and built
Water mist and sprinkler systems
Send drawings and the fire strategy. We'll confirm the likely system and design standard.
Layouts, hydraulic calculations and documents for your insurer and Building Control.
Planned around your build programme or operating hours.
Testing, handover pack and a maintenance plan from day one.
Commercial systems need an annual service, plus the routine owner checks the design standard sets. We test pumps and valves, check heads and nozzles for damage and obstruction, and provide the service records insurers expect. We also maintain systems installed by other contractors.
Service & maintenance plans →Most projects are quoted after a drawing review.
Read our cost guide →Yes. High-pressure water mist uses so little water that it can protect live equipment, and it's FM Approved for data processing equipment rooms and halls.
Each has its place. Gas systems need a sealed room and agent refills after discharge. Water mist doesn't need room sealing, cools the fire and nearby equipment, and helps prevent battery fires reigniting.
Yes. Our systems can work alongside existing suppression, for example to cover battery rooms or new halls.
Yes. We plan work with your operations team in agreed change windows so live services stay up.
Yes. We offer a full service including design, installation, commissioning, scheduled maintenance, compliance checks, and emergency support.
Yes. We can inspect, upgrade, and maintain existing mist or sprinkler systems to bring them in line with current regulations and performance expectations.
Our commercial water mist systems are designed to BS EN 14972-1, and our commercial sprinkler systems to BS EN 12845.
For residential projects, our sprinklers are designed to BS 9251. Our SmartMist DOME™ residential water mist system has met the performance criteria of the BS EN 14972-17:2025 open room fire test (3.5 m room height) at the FPA, a UKAS-accredited fire test laboratory, and every installation is designed to BS EN 14972-1. We also work to project and insurer requirements.
We assess your fire strategy, occupancy type, building design, and water supply. Based on this, we may recommend high-pressure mist, low-pressure mist, wet or dry sprinkler systems, or a hybrid approach.
We recommend annual servicing in line with BS 9251, BS EN 14972-1 or BS EN 12845, depending on the system type. In high-risk or heavily used environments, more frequent checks may be required.
Yes. SmartMist offers both advanced water mist systems and traditional commercial sprinkler systems. We recommend the most suitable option based on your building’s fire strategy, layout, risk profile, and water supply.
Send what you have. These help us quote faster:
Or call 0330 113 5900