Home

›

Residential

›

New Build Developments

Residential fire suppression

Fire Suppression for New Build Developments

Sprinkler and water mist systems for new homes and apartment developments. Designed with your team, installed to your build programme, and signed off for Building Control and warranty providers.

✓ Water mist & sprinklers
✓ Design to commissioning
✓ UK-wide installation
Fire Suppression for New Build Developments

Fire tested to BS EN 14972-17:2025, the new UK standard for home water mist

Our residential water mist system has passed full-scale fire tests to BS EN 14972-17 at the FPA, a UKAS-accredited test house, making us one of the first UK companies to do so. It’s the standard that replaced BS 8458, which gives Building Control and approved inspectors confidence in your fire strategy.

Open-plan fire safety without the fire doors

Keep your open-plan kitchen, loft conversion or living space. Discreet DOME water mist nozzles provide an approved alternative to protected escape routes and can reduce the need for fire doors, subject to Building Control.

80% less water than a domestic sprinkler system

Our DOME Gen 2 nozzle uses around 8 litres per minute, compared with 45 to 60 for a typical sprinkler head. That means less water damage, smaller pipework, and in most homes no water storage tank.

British-designed, made and installed, with Building Control support

We design, manufacture, install and maintain every home water mist system in-house. Our compliance team works directly with Building Control to help get your project signed off.

OverviewRisk factorsRegulationsMist or sprinklerDesignStandardsProjectMaintenance & costFAQsEnquire
Residential fire protection

Fire protection designed into the development

On a new development, fire suppression is easiest and cheapest when it's designed in from the start. Late changes from Building Control can mean retrofitting into finished homes and delaying handover.

SmartMist designs and installs water mist and sprinkler systems for developers and contractors across the UK. We work from the design stage, agree the standard with your fire engineer and Building Control, and fit the system to your build programme.

  • Houses, flats and mixed developments
  • Plot-by-plot or block installs
  • England, Scotland and Wales
See all residential fire suppression →
Fire protection designed into the development
What shapes the design

What shapes fire protection on a new development

Two homes with the same floor area can need very different systems. These are the factors we look at first.

Where you build

Wales requires sprinklers in all new homes. Scotland requires them in new flats and social housing. England in flats 11m and over.

Building type

Houses, low-rise flats and tall blocks each have different triggers and design standards.

Design freedom

Suppression can allow open-plan layouts, longer escape routes or fewer fire doors.

Water supply

Mains capacity decides whether each home needs a tank, or a block needs a pump set.

Build programme

First and second fix need to fit around other trades and handover dates.

Warranty and sign-off

Building Control and warranty providers need certificates for every plot.

Requirements

Do new build homes need sprinklers?

In Wales, all new homes do. In Scotland, new flats and social housing do. In England, new blocks of flats 11m and over do, and other homes may where the design relies on it.

Wales

All new homes

Sprinklers have been required in all new and converted houses and flats in Wales since January 2016.

Scotland

Flats & social housing

Since March 2021, new flats, social housing and shared multi-occupancy buildings need automatic fire suppression.

England

Approved Document B

Sprinklers throughout new blocks of flats 11m and over, and a second staircase in new blocks 18m and over.

Choosing a system

Water mist or fire sprinklers?

We install both, so we recommend whichever meets your design standard with the least water and disruption.

Water mist

Less water, often no tank

Water mist uses a fraction of the water of a sprinkler, so many homes run from the mains without a tank. Small-bore pipework is quick to install at first fix, and discreet heads suit finished interiors.

Explore residential water mist →
Fire sprinklers

The established, widely specified route

Residential sprinklers to BS 9251 are the established route and the one many fire strategies specify, particularly in apartment blocks. We design and install both, including tank and pump sets for larger buildings.

Explore residential sprinklers →
Mist and sprinklers aren't interchangeable in every building. We confirm the design standard with Building Control and your fire engineer before design, then recommend the system that meets it.
Design & installation

Designed with the building, installed around residents

We join at design stage, agree the standard with your fire engineer and Building Control, and coordinate pipe routes with your M&E design.

Installation follows your programme, plot by plot or block by block, with certificates for Building Control and your warranty provider at handover.

Send your drawings

Design stage

Standard and layouts agreed before construction.

Plot-by-plot

First and second fix to your build programme.

Water supply

Mains-fed homes or tank and pump sets for blocks.

Handover

Certificates for Building Control and warranty.

Standards & compliance

Standards for new build fire suppression

Which standard applies depends on the system, the building and, often, Building Control.

Standard
Relevance
Status

Approved Document B

Sprinklers in new blocks of flats 11m and over; second staircase at 18m and over.

Current

BS 9251:2021

Code of practice for sprinkler systems in domestic and residential occupancies.

Current

BS 9991:2024

Fire safety in the design, management and use of residential buildings.

Current

BS EN 14972-17:2025

The European fire test standard for residential water mist. Our SmartMist DOME™ residential water mist system has met the performance criteria of the BS EN 14972-17 open room fire test (3.5 m room height) at the FPA, a UKAS-accredited fire test laboratory.

Tested

BS 8458:2015

The former UK residential water mist standard, withdrawn by BSI in July 2025 and replaced by BS EN 14972-17.

Withdrawn

BS EN 14972-1

The European standard for water mist design, installation, inspection and maintenance. Every SmartMist water mist installation is designed to it.

Designed to

This page explains typical requirements. It isn't a fire strategy or design specification.

Certification & accreditation

ISO 9001:2015
Quality management
SafeContractor
Health and safety accreditation

Tested to BS EN 14972-17:2025 at the FPA

Our SmartMist DOME™ residential water mist system met the performance criteria of the open room fire test (3.5 m room height) at the FPA's UKAS-accredited fire test laboratory. Every installation is designed to BS EN 14972-1.

See all our accreditations →

Recent Clients

Apartment Block, Water Mist System, Swansea
Project example

Apartment Block, Water Mist System, Swansea

Apartment Block, Swansea, Wales

SmartMist was entrusted with the fire safety system for a modern eight-apartment block in Swansea. Adhering to the stringent full-coverage fire regulations in Wales, our task was to implement a state-of-the-art mist system in each apartment, ensuring the highest safety standards.

This development, aimed at the sales market, required a fire safety system that would not only provide exceptional protection but also appeal to potential buyers. Each of the six apartments was to be equipped with six mist heads and an individual pump, offering a complete fire suppression solution.

How we work

From drawings to handover

01

Review

Send drawings and the fire strategy. We'll confirm the likely system and design standard.

02

Design

Layouts, hydraulic calculations and documents for Building Control and your warranty provider.

03

Install

Planned around your build programme or residents.

04

Commission

Testing, handover pack and a maintenance plan from day one.

Aftercare

Servicing, including systems we didn't install

Residential systems need an annual service, plus the simple owner checks the design standard sets. We check pumps, valves and heads, and keep the records Building Control, landlords and insurers expect. We also maintain systems installed by other contractors.

Service & maintenance plans →
Cost

What affects the price

  • Number of plots and house types: repeat designs reduce cost
  • Mist or sprinkler: changes pipe size and whether a tank is needed
  • Houses or flats: blocks may need a pump set
  • Location: Wales and Scotland set coverage
  • Water supply: mains pressure and flow per plot
  • Programme: phasing and handover dates

Most projects are quoted after a drawing review.

Read our cost guide →
Guides

Regulations and guidance

FAQs

New build fire suppression FAQs

Do new build houses need sprinklers?

In Wales, yes: all new homes have needed sprinklers since 2016. In Scotland, new flats and social housing need them. In England, most new houses don't, unless the design relies on them, for example an open-plan layout.

When should we bring you into a new development?

At design stage. Agreeing the standard with Building Control and your fire engineer early avoids late changes and retrofitting into finished homes.

Can you work plot by plot to our programme?

Yes. We fit first fix with other services and second fix after decoration, plot by plot or block by block, to match your handover dates.

What do we get at handover on a new development?

Commissioning certificates for each plot for Building Control and your warranty provider, plus a maintenance plan for the homeowner or managing agent.

Is BS 8458 still current for water mist systems?

No. BSI withdrew BS 8458:2015 in July 2025 and replaced it with BS EN 14972-17, the European fire test standard for residential water mist.

Our SmartMist DOME™ residential water mist system has met the performance criteria of the BS EN 14972-17:2025 open room fire test (3.5 m room height) at the Fire Protection Association (FPA), a UKAS-accredited fire test laboratory, and every installation is designed to BS EN 14972-1. If you have an existing system, keep it serviced and speak to us before any alterations or extensions.

Are SmartMist residential water mist systems independently tested?

Yes. Our SmartMist DOME™ residential water mist system has met the performance criteria of the BS EN 14972-17:2025 open room fire test (3.5 m room height) at the Fire Protection Association (FPA), a UKAS-accredited fire test laboratory. Every installation is also designed to BS EN 14972-1, the European standard for water mist design, installation, inspection and maintenance.

BS EN 14972-17 replaced the previous UK residential water mist standard, BS 8458, which BSI withdrew in July 2025. See our full fire test and certification record.

Will all the nozzles activate in my property in the event of a fire?

No, that is a myth. Only the nozzle where the frangible bulb breaks will be activated, in the unfortunate event of a fire.

Does smoke caused by burning food trigger the water mist nozzle?

No. Smoke does not trigger the nozzle. The bulb inside each nozzle only breaks with direct heat from a fire, at 57°C (135°F).

A nozzle near an oven won't be set off by opening the oven door, because the heat disperses quickly into the room.

Are misting fire suppression systems safe for electronics and furniture?

Yes, misting systems use fine water droplets that reduce fire damage without excessive water exposure, making them safe for electronics and furniture.

Get a quote

Have a project in mind?

Send what you have. These help us quote faster:

  1. Site plan and house types
  2. Number of plots or flats
  3. Where you're building
  4. Fire strategy, if you have one
  5. Building Control and warranty provider
  6. Mains water details
  7. Build programme
  8. Site manager contact

Or call 0330 113 5900

Upload Floor Plan Drag and drop files here or click to choose
No file chosen
Should be Empty:
Related

Other residential sectors

No items found.
Get a quote

Call Us